1、 Performance Overview

Provide isolated working power supply to transmitters in hazardous areas, while detecting the current in the circuit, and output current or voltage signals to the safe area through isolated transmission. The three terminal isolation of input, output, and power supply has the advantages of fast response, low power consumption, and good temperature characteristics.

2、 Technical parameters

Explosion proof mark: [Exia] Ⅱ C

Dangerous area allows input signal: current signal

Input impedance: approximately 80 Ω

Can output signals to the safe zone:

Current: 0 (4) mA~20mA; 0mA～10mA

Voltage: 0 (1) V to 5V;     0V～10V

Output load capacity:

0(4)mA～20mA：≤300Ω；

0mA～10mA：≤600Ω

0(1)V～5V：≥1MΩ；

0V～10V：≥2MΩ

Output ripple:<1mV Temperature drift:<30ppm/℃

Distribution output voltage: open circuit voltage ≤ 24V, full load 20mA output voltage ≥ 15.5V

Isolation transmission accuracy: ± 0.2% F ∙ S (25 ℃± 2 ℃)

Response time: ≤ 0.2ms Stability time: ≤ 2ms

Frequency response: 0Hz~300Hz (0Hz~5kHz can be customized)

Dielectric strength: ≥ 2500V AC (between input/output/power supply, leakage current 1mA, testing time 1min)

Insulation resistance: ≥ 100M Ω (between input/output/power supply)

Electromagnetic compatibility: EMC complies with IEC61000-4

Certification parameters of National Quality Supervision and Inspection Center for Instrumentation and Electrical Products (CQST): Um=250V AC/DC

10. Between terminals 11: Uo=5V

ⅡC         ⅡB          ⅡA

Co      70μF       700μF        700μF

9. Between terminals 11: Uo=26V, Io=87.6mA, Po=570mW

ⅡC          ⅡB          ⅡA

Co      0.069μF     0.539μF      1.82μF

Lo      3.2mH       9.6mH        25.6mH

Power supply: DC 18-32V (typical value 24V DC)

Power consumption: Single current source input, single output 0.4W

Single current source input, dual output 0.6W

Single channel two/three wire input, single channel output 1.0W

Single channel two/three wire input, two channel output of 1.2W